Get a closeout sale quote today

BE8200 2-Channel HD H.264 or AVS Encoder

The Telairity BE8200 is a scalable, fully programmable broadcast quality encoder for high definition video formats. It combines Telairity's uniquely powerful hardware and software technology with leading-edge video compression (either H.264/AVC or AVS) to achieve industry-leading video quality at very low bit rates, below 6Mbps HD formats. The multichannel BE8200 encoding platform addresses the need of today's broadcasters to improve system density while lowering per-channel costs wherever more than one HD channel is required. Featuring Telairity's unique "instant on" technology, the BE8200 can be readily upgraded via a software download to add new features or enhance performance.

Video Encoding Features

  • 2 fully independent HD channels with separate I/O connectors
    • SDI input and source loop-out with dual ASI and dual IP outputs
  • Codecs: H.264/AVC High (FRExt) profile @ Level 4; or AVS-P2
  • Input Formats: 1080i or 720p (auto-detected on input); 1080p to 30fps
  • IOutput Horizontal Resolutions: 720p x 960/1280; 1080i x 1920/1440/1280
  • Rate Control – 15 to 2 Mbps
    • Constant Bit Rate (CBR), Variable Bit Rate (VBR)
  • Scene change detection
  • Entropy Coding: CABAC or CAVLC per AVC or AVS profiles
  • GOP Mode: selectable fixed length or adaptive
  • Adjustable Spatial Preprocessing and Deblocking (Loop) Filters

Audio Encoding Features (per channel)

  • HD-SDI embedded audio input – per SMPTE 299M
    • Four programs (stereo pairs) per channel: Stereo, Dual Mono, Mono
  • MPEG-1 Layer 2 encoding, bit rates: 64 to 384 Kbps
    • MPEG-4 AAC-LC or –Hev2 for higher quality or lower bit rates (to 12 Kbps)
  • Dolby Digital (AC-3) and Dolby E pass-through

Control Featurs

  • On-board Flash memory for fast program upload at boot
  • Web browser control via Ethernet interface

Output (per channel)

  • 2 MPEG-2 transport streams over DVB-ASI 75 ohm coax
  • 2 IP transport streams over 10/100 Base-T Ethernet

Video Input (maximum of 1 per channel)

Input Format Options:
2 HD-SDI (SMPTE 292M) inputs
Video Input Formats:
4:2:2 for 1080i, 1080p, 720p
Frame Rates:
60*, 59.94*, 50*, 30, 29.97, 25, 24, 23.98 fps (*720p only)
Video In:
1 BNC/channel for 75 ohm coax (SD or HD)
SDI Loop Out:
1 BNC/channel (loop out for monitoring, redirection)

Audio Input

Input Format:
Embedded in SDI per SMPTE 299M
Dolby Digital (AC-3) and Dolby E pass-through
External Audio: 2 digital AES + 2 analog L/R stereo pairs per channel (cables optional)

Compressed A/V Output

Output Interface:
Digital Video Broadcast – Asynchronous Serial Interface
(DVB-ASI), 270Mbps, buffered non-inverting
10/100 Base-T Ethernet for IP
Packet Format:
MPEG-2 188-byte Transport Stream (TS) packets in either
TS/UDP/IP or TS/RTP/UDP/IP format with optional FEC
Compression Format:
H.264 Profiles: High Profile (Level 4); AVS-P2
Compressed Bitrates:
User programmable, CBR or VBR, 2-15 Mbps/channel HD
ASI Stream Out:
Twist-lock BNC connectors (2 per channel)
IP Stream Out:
RJ-45 connectors (2 per channel)

Control

Interface:
1 Ethernet control interface per channel with RJ-45 connector via hub (or switch) to Web browser controller
Control Application:
Web browser Interface over Ethernet
Network Management:
Telairity NMS or standard SNMP

Power Specifications

Input voltage:
100 to 240 VAC (Auto sensing)
Line frequency, Power:
47 to 63 Hz; 390 Watts maximum

Mechanical Specifications

Dimensions and Weight:
1RU (H) x 19” (W) x 28” (D) rack mountable, 25 lbs.

Environmental Specifications

Cooling:
Forced air-cooling side to side
Operating Temperature:
-10° to 55°C
image