image

Superior technology.
Better products.
More value.

SES3200 HD/SD Dense Encoding System

The Telairity SES3200 is a robust, integrated solution for customers seeking to maximize encoding or transcoding density for SD or HD/SD video while minimizing cost. A completely modular 12 RU 14-slot design built around the industry-standard ATCA Chassis, the SES allows for easy scaling, from 8 to 32 channels, and easy upgradeability, from SD to dual auto-switching SD/HD capability. A fabric backplane eliminates the need for external cables, routers, switches, and multiplexers, providing the ability to route any input to any output, and to multiplex all outputs over dual ASI and IP interfaces. Configurable redundancy, automatic fail-over, multiple power supplies, and extensive monitoring and alarm functions make the SES3200 dense encoding system one of the most reliable as well as one of the most flexible encode/transcode solutions.

image

Video Encoding Features

  • H.264/AVC High, Main & Baseline Profiles to L3
  • Input Video Formats: 576i (PAL), 480i (NTSC) SD or 1080i, 720p HD
  • Transcoding, Anamorphic scaling, De-interlacing
  • Output Resolutions:
    • HD – 1080i x 1920 / 1440 / 1280 and 720p x 1280 / 960
    • PAL — 720x576i/p (full SD) to 176x144p (QCIF)
    • NTSC — 720x480i/p (full SD) to 320x240p (QVGA)
    • Other mobile resolutions including CIF, HVGA, HQVGA, QQVGA, SQCIF, etc.
  • Rate Control: Constant Bit Rate (CBR) or Variable Bit Rate
  • Scene change detection with fixed, open, closed, adaptive GOP structures
  • Spatial preprocessing, Deblocking (Loop) filter

Audio Encoding Features (per channel)

  • Embedded or External audio input ; AC-3 pass-through
    • Four programs (stereo pairs): Stereo, Dual Mono,
  • Bit Rates: 12 to 128 Kbps; Sample Rates: 32, 44.1, 48 KHz
    • Audio Codecs: MPEG-1 Layer 2; MPEG-4 AAC-LC or -HEv2

Control Features

  • Telairity EMS and Configuration Software
  • Industry Standard MIB supports interface with 3rd party SMS/NMS

Output

  • Multiplexed MPEG-2 transport stream over DVB-ASI
  • SPTS IP stream over Gigabit Ethernet
    • Pro-MPEG FEC (Forward Error Correction) with RTP transport protocol

Video Inputs

Input Format:
SDI, ASI, or IP input • Composite input option
Video Input Formats:
4:2:2 for PAL and NTSC SD, 720p or 1080i HD
Frame Rates:
(*720p only)
Frames per second: progressive mode 23.98, 24, 25, 29.97, 30, 50*, 59.94*, 60*
Fields per second: interlaced mode: 50, 59.94, 60
Digital Video In:
Up to 32 BNCs for 75Ω cable (SDI, ASI, composite)
Up to 32 RJ-45s for Cat5/6 Ethernet cable (IP)

Audio Input

Input Format:
Embedded per SMPTE 272M (SD-SDI); 299M (HD-SDI)
Dolby Digital / AC-3 and Dolby-E pass-through

Compressed A/V Output

Output Interface:
One Digital Video Broadcast — Asynchronous Serial Interface (DVB-ASI), 270Mbps, buffered non-inverting with MPTS of up to 32 channels
One GigE Ethernet Interface with SPTS of up to 32 channels
• 2nd set of Interfaces available on optional output card
All channels fed to each output board. Optional 2nd output card provides dual redundant ASI and IP outputs for the same network (primary and backup) or separate networks. Separate networks may be of the same or different types (e.g., broadband and broadcast)
Packet Format:
MPEG-2 188-byte Transport Stream packets in formats:
TS/UDP/IP, TS/RTP/UDP/IP with optional FEC, RTCP
Compression Format:
H.264/AVC (MPEG-4 Part 10) Baseline, Main, High profiles; MPEG-2 Main profile; AVS 2.0
Compressed Bitrates:
User programmable: 150 Kbps to 15 Mbps, CBR

Network Management

Telairity EMS or standard SNMP for NMS/SMS

Power Specifications

Input voltage:
-48VDC; or 100 to 242 VAC (auto-sensing) with 1RU AC/DC conversion unit
Line frequency:
47 to 63 Hz
Power consumption:
Less than 40W per channel

Mechanical Specifications

Dimensions & Weight:
12RU (H) x 19" (W) x 14" (D) rack-mountable Fully loaded with 14 boards, about 100 lbs
 

Environmental Specifications

Cooling:
Forced air, inlets at front, outlets at back. Temperature-controlled fan speed
Temperature:
Operating: 10° to 55°C; Storage -20° to 60°C
Humidity & Pressure:
≤95% (non-condensing); 86kPa ~ 106kPa
image